Products | Acrylic Wall Putty


Application Procedure
Ensure that surface is free from dust, dirt, loose particles & moisture. Previously painted surface should be stripped off the old paint. Apply one coat of Archer Cement Primer W/T on wall. Apply Putty to fill the cracks and dents on the wall with the help of putty knife suitably thinning it with water, if required. Leave it to dry for 6-8 Hrs. Apply a second layer of Putty, if required. Allow overnight drying of the Putty. Using a fine emery paper No. 320 dry cut the Putty layers to get the desired level of smoothness. Again add another coat of Cement Primer to seal the pores making the surface ready for finish coat application. Precaution - Do not over dilute. - Stir well and strain before use.

Safety Procedure
    • Store in well ambient conditions, ventilated locations & away from the source of ignition and fire.
    • Keep away from children.
    • In case of eye/skin contact, wash with plenty of water.
    • Inhalation / Injection will cause danger. In case, move to fresh air & consult medical practitioners in both the cases.
    • Do not apply when ambient temperature might drop to levels below 10°C within 4 hrs of application.
    • Avoid extra thinning for better results.
    • The container must be tightly closed when not in use. Stir well and strain before use.
    • Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Note
    • Covering capacity of the paint depends on the surface preparation, substrate, application process and other factors.
    • The practical coverage will differ from the theoretical covering capacity mentioned here.