Products | Cement Wall Putty

Application Procedure
Take the desired quantity of Archer Exterior Putty which can be used in 4 hours and Make a homogenous paste by adding 45 - 50% water by Volume and allow it to stand for 10 - 15 minutes. Moisten the wall and apply one coat of putty with the help of Putty Knife. Draw the blade from bottom to top while applying the putty. Make the surface smooth using Water Paper No. 400 or soft wet cloth. Cut the surface and make it smooth after 3 - 4 hours. Clean the surface with a clean cloth. Moisten the wall and apply second coat of putty. Cut the surface to give a final thickness of 1.5mm, using an emery paper No.400. Clean the cut surface with a soft wet cloth or wet sponge and allow 3 days before applying the top coat.

Safety Procedure
    • Store in well ambient conditions, ventilated locations & away from the source of ignition and fire.
    • Keep away from children.
    • In case of eye/skin contact, wash with plenty of water.
    • Inhalation / Injection will cause danger. In case, move to fresh air & consult medical practitioners in both the cases.
    • Do not apply when ambient temperature might drop to levels below 10°C within 4 hrs of application.
    • Avoid extra thinning for better results.
    • The container must be tightly closed when not in use. Stir well and strain before use.
    • Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

    • Covering capacity of the paint depends on the surface preparation, substrate, application process and other factors.
    • The practical coverage will differ from the theoretical covering capacity mentioned here.