Products | Exterior Primer

Application Procedure
New surface: New surface should be given enough time to mature. Prepare surface using Emery Paper 180 and wipe clean. Old surface: Sand the old surface with Emery Paper and make it free of all loose and powdery material and old paint films. The algale and fungal growth can be removed using wire brush and the surface must be cleaned with water jet and left to dry. All structural cracks must be open in V shape filled with White Cement/Cement based Plasters and leakage should be stopped, before actual painting. Cracks should be filled up using a cement and sand mixture in the ratio 1:3. Finishing: Apply 2 coats of Archer Exterior Primer thinned with 70 - 80% by volume of potable water. Precaution - Do not over dilute. - Stir well and strain before use.

Safety Procedure
    • Store in well ambient conditions, ventilated locations & away from the source of ignition and fire.
    • Keep away from children.
    • In case of eye/skin contact, wash with plenty of water.
    • Inhalation / Injection will cause danger. In case, move to fresh air & consult medical practitioners in both the cases.
    • Do not apply when ambient temperature might drop to levels below 10°C within 4 hrs of application.
    • Avoid extra thinning for better results.
    • The container must be tightly closed when not in use. Stir well and strain before use.
    • Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

    • Covering capacity of the paint depends on the surface preparation, substrate, application process and other factors.
    • The practical coverage will differ from the theoretical covering capacity mentioned here.